멕길베어링
약 90년 전에 설립되어 생산하고 있는 McGILL Bearing은 정밀규격 베어링
(Standard Precision Service)으로 전 세계적으로 유명합니다.
CAMROL CAM FOLLOWER BEARINGS* | |||||
---|---|---|---|---|---|
Series | Outer Ring Diameter Size Range |
Sealing | Outer Race Shape |
Stud Type | Roller Type |
CF | 1/2-10" | Unsealed or with Lubri-Disc Seal |
Cylindrical or Crowned |
Standard or Eccentric with Screw Drive Slot or Hex Hole |
Full Comlement |
CFH | 1/2-7 | Heavy, With Screw Drive Slot or Hex Hole |
Full Comlement |
||
CYR | 3/4-10 | N/A | Full Comlement |
||
BCF-S | 1/2-4 | Standard or Eccentric with Screw Driver Slot or Hex Hole |
Non-Metalic Bushing |
||
BCYR-S | 3/4-4 | N/A | Non-Metalic Bushing |
||
MCF | 13-90(mm) | Standard or Eccentric with Screw Driver Slot or Hex Hole |
Ful Comlement or Caged |
||
MCYR | Diameter 16-90(mm) |
N/A | Ful Comlement or Caged |
All series can be relubricated. The needle roller type are supplied prelubricated
with a high-grade lithium base grease having an operating temperature of-29℃ to 120℃ (-20˚F to + 248˚F)
TRAKROL TRACK ROLLER, WIRE STRAIGHTENER AND GUIDE BEARINGS* | |||||
---|---|---|---|---|---|
Series | Roller Diameter | OD Shape | Insert Bearings Less Than 3" Roller Diameter | Insert Bearings 3" Roller Diameter or Greater | Seals |
RCF VCF FCF UCF | 11/2-8" 31/2-81/2 11/2-8 215/16-1 thru 15/16-10 |
Plain Cylindrical v-Grooved Flanged U-Grooved Wire Straighteners | Heavy Duty Ball Bearing | Tapered Roller Bearings | Single lip rubber seals, smaller sizes; Double lip rubber seals, larger sizes |
*Standard operating temperature range is - 30˚F to + 255˚F
All sizes have large lubricant reservoirs for extended maintenance-free operation
CAGEROL(MR) CAGED AND GUIDEROL(GR) CENTER-GUIDED ROLLER BEARINGS | |||||
---|---|---|---|---|---|
Series* | Outer Race OD Size Range |
Inner Race Bore Size |
Roller Type | Application Environment Suitability |
Seal Combinations |
Cagerol (MR) | 11/8-111/8" | 3/8-8" | Caged | Higher Speeds, Shaft Misalignment |
N/A |
Cagerol Sealed (MR) |
11/8-51/4 | 3/8-33/4 | Caged | For Contaminated Application Requiring Extended Life |
S SS RS RSS RSR |
Guiderol(GR) | 11/8-111/8 | 3/8-8 | Full Complement |
Full Race Support Maximum Static Caacity-Lower Range Speeds Oscillating Motion |
N/A |
Guiderol Sealed (GR) |
11/8-51/4 | 3/8-33/4 | Full Complement | For Contaminated Application Requiring Extended Life |
S SS RS RSS RSR |
MI | Inner Race Only | 3/8-8 | N/A | Hardened and Ground Steel Bushings or Sleenes |
*Outer ring and roller assemblies(MR)or(GR)and associated inner rings(MI)are packed and shipped separatele. Each type its own number and both outer and inner numbers should be specified when ordering a complete bearing.
SPHERE-ROL SINGLE ROW SPHERICAL ROLLER BEARINGS | ||||
---|---|---|---|---|
Series | Bore | Outside Diameters |
Sealing Options |
Feature Options |
222000 | .5906-5.9055" 15-150mm |
1.3780-10.6299" 35-270mm |
Unsealed, NYLAPLATE or LAMBDA |
Tapered Bore Expansion Type, Choice of Diametral Clearance |
AIRCRAFT TRACK ROLLER AND HOUSING MOUNTED AIRFRAME BEARINGS | ||||||
---|---|---|---|---|---|---|
Series | Military Standard Number MS* | Bore Size | Outer Ring OD Size Range | Sealing Option | Relubrication | Plating |
NBF | 24465 | .1900-2.7500" | .7500-5.000" | Unsealed | Y | Exposed Surfaces of Outer Bore are Chrom Plated Other Exposed Surfaces as Mounted, Cadmium Plated |
NBL | 24466 | .3750-2.0000 | 1.1250-3.8750 . | Unsealed | Y | |
AFC | 24466 | .3750-2.0000 | 1.1250-3.8750 . | Unsealed | Y | |
AL | 21439 | .3750-2.0000 | 1.12500-3.8750 | LUBRI-DISC Seals | Y | |
NBE | 24463 | .1900-.3125 | .8750-1.0625 | Unsealed | Z | External Surfaces Except Bore are CadmiumPlated, Surfaces of Outer Ring are Chrome Plated. Remaining Exposed Surfaces are Cadmium Plated |
NBK | 24464 | .3750-3.5000 | 1.1875-4.8450 | Unsealed | YZ | |
NBC | 24461 | .1900-4.0000 | .6875-4.8750 | LUBRI-DISC Seals | YZ | |
HRS Cylindrical OD | 21432 | Integral Stud | .5000-1.1250 | RS Type Labyrinth | Flange or Threaded End | |
CHRS Crowned OD | 21432 | Integral Stud | .5000-1.1250 | RS Type Labyrinth | Flange or Threaded End |
Y=Annular lubrication groove in bore and oil holes in inner ring
Z=Annular lubrication groove on OD and holes in outer ring